Toshiba Strata CIX GVPH Programming Manual Download Page 26

Page: 26 / 184

Configure UADM2 Software

Tools Utility

2-4

Strata CIX40 Voice Processing Programming Manual 7/06

Tools Utility

This section discusses the Tools menu. For the Backup Utility, Restore Utility, Retrieve Trace
File and Filecopy functions, see

Chapter 8 – Maintenance and Troubleshooting

To access Tools Option

1. Press

Alt

2. Type the password (the default password is

Stratagy

) and press

Enter

. See

“Tools”

on page 1-2

for a description of the menu options.

Toshiba Plug and Play

The GVPH is pre-installed as Strata CTX100 with SMDI - 3-digit mailbox numbers.
Select Strata CTX670 Expanded for 4-digit mailbox numbers.

Telephone System Configuration

GVPH is set with a fixed telephone system configuration and cannot be changed using this
option.

System Integration Patterns

GVPH is set with a fixed system integration pattern and cannot be changed using this option.

Summary of Contents for Strata CIX GVPH

























































































































































































Search results

Summary of Contents for Strata CIX GVPH

Reviews:

Toshiba Strata CIX GVPH, Programming Manual, Page: 26 / 184

Search results

Summary of Contents for Strata CIX GVPH

Reviews: