manualshive.com logo in svg

Toshiba Strata CIX GVPH, Programming Manual, Page: 103 / 184

Share
Download
Toshiba Strata CIX GVPH Programming Manual Download Page 103

Strata CIX40 Voice Processing Programming Manual    7/06

5-1

T

o

k

e

n Pro

g

ra

mmi

ng

Token Programming

5

Strata CIX40 Voice Processing System’s Token Programming Language consists of 
commands, or tokens, that instruct voice processing what actions to perform. The tokens that 
are generally used are simple and perform standard expected actions such as dialing an 
extension.
The Token Programming Language gives the system versatility. Its capabilities include, but 
are not limited to:

•

Gathering information from callers

•

Confirming digits entered by a caller

•

Relaying messages to digital pagers

•

Controlling message waiting lights

The Token Programming Language uses three types of tokens: singular, defined, and 
replaced. For a detailed description of each token, see 

Tables 5-1

~

5-3

.

There are twenty “token” files supported by GVPH voice processing:

•

\token01\txt file1 (can be any 8x3 DOS file name)

•

\token0\txt file2 (can be any 8x3 DOS file name)

•

•

\token20\txt file20 (can be any 8x3 DOS file name)

Using the Token Programming Language

The Token Programming Language may be used in the following fields:

Users Menu’s Extension Field

Typically the Users Menu’s 

Extension

 field contains the actual telephone station/extension 

number for the corresponding User ID. It may contain tokens. Or, it may be empty.

Auto’s Extension Field

The default value for the Auto record’s 

Extension

 field is the value in the User’s 

Extension

 

field. However, it may contain tokens. When the Auto record is active, voice processing uses 
this 

Extension

 field rather than the Users Menu’s 

Extension

 field.

Notify’s Method Field

The Notify record’s 

Method

 field must always be defined for voice processing to perform the 

proper type of notification.
To program the 

Extension

 or 

Method

 fields, enter a series of commands, or tokens, that 

instruct voice processing what actions to perform. A field would, therefore, contain 

TokenTokenToken...Token

, where 

Token

 defines how to perform the actions.

Voice processing provides reserved User ID mailboxes that have common features pre-
programmed, including future delivery, guest defaults, and fax tone detect. Notify contains 
templates (e.g., message waiting light control and pagers) you can use for defining User ID 
Notify records.

Summary of Contents for Strata CIX GVPH

























































































































































































Reviews:

No comments