Toshiba Strata CIX DP-5000 series User Manual Download Page 123

Page: 123 / 152

Strata CIX DP5000-series Telephone User Guide 05/09

107

Single Line Telephone

The Single Line Telephone is the smallest telephone set in the DP5000-series family.
This telephone has some variations on button functionality compared to the other
DP5000-series telephones. These differences are detailed here.

Buttons

Some of the fixed buttons are a little
different from the other DP5000-series
telephones.

Message (Msg) – This button is used to
call back the station or voice mail device
that activated the LED.

Redial – Redial button by default. This
button can also be programmed as a
Programmable Feature Button.

Off-hook – This button works as a PDN
that can be used to answer and make calls.

Message

Redial

Off-hook

Speaker

Summary of Contents for Strata CIX DP-5000 series

























































































































































Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands

Toshiba Strata CIX DP-5000 series, User Manual

Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands