Administrator Programming
Functions
Strata CIX DP5000-series Telephone User Guide 05/09
97
Administrator Programming
7
This appendix contains some of the functions that can be performed using
Administrator Mode.
Important!
•
These functions require Strata CIX 5.1 or higher system software.
•
To access the Admin mode, the telephone must be enabled for these functions in
system programming using eManager. Refer to “
Strata CIX Programming Manual,
Volume 1
” for eManager programming.
Functions
Use the Soft Keys on the telephone to program the following functions in
Administrator mode:
•
Phone Name – enter the Extension (PDN) name for any telephone in the Strata
CIX
•
Door Name – enter door phone name
•
System SD/Name
1
– system speed dial names
•
Station SD/Name
1
– station speed dial names for any telephone in the system
•
Exchange (CO) Line Name – Exchange (CO) line names
•
DNIS Name – DNIS names
•
Phone Key Label – button names on the electronic telephone key strips
•
LM Key Label – button names on the Add-on module key strip
1
The Admin telephone mode allows speed dial names to be programmed, but the actual speed dial numbers
are programmed using the speed dial programming procedures described in the User Guide.
