Toshiba Strata AirLink DK40, Programming Manual

Page: 132 / 378

System & Station Program 33 [PDN] Station Hunting (Voice Calls Only)
3-74
Strata DK40 Programming Manual Spring 1999
Program 33
[PDN] Station Hunting (Voice Calls Only)
Program Type: Station
Initialised Default: Initialised Data is Blank
Program 33 Overview
Program 33 assigns Station Hunting to [PDNs] . When a called station is busy, the Station
Hunting feature will ring the alternate “hunt to” [PDNs] defined in this program. If the
“hunt-to” [DN] is busy, the system will try to ring the next “hunt-to” [DN], and so on.
If a “hunt-to” [DN] is in the Call Forward mode, the call forward will have priority over the
hunt. An Exchange line will hunt from a [PDN] only if it has been assigned to immediate ring
at the owner station of the [PDN] exclusively (
in Programs 71~75 ).
(QWHU 3URJ 0RGH 0 6SNU 6 6 +ROG 0 6SNU & +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor [PDN] Port Range
DK40 000~027
Hunt From Hunt To Hunt From Hunt To
000 014
001 015
002 016
003 017
004 018
005 019
006 020
007 021
008 022
009 023
010 024
011 025
012 026
013 027
SELECT = [PDN] Port Reference
Number of the “hunt-from” station.
To add a port range, enter XXX
*
XXX
(low port * high port).
HUNT TO = [PDN] Port Reference Number of the “hunt-
to” station.
Press LED Button 01 to delete digit from the “hunt-to” port.