Toshiba Strara CTX Series, Installation And Maintenance Manual, Page: 229 / 290

Station Apparatus
7-31
Strata CTX I&M September 2002
DKT2104-CT
The DKT2104-CT works with Strata CTX telephone
systems and provides you with reliability, long life, and
outstanding performance. Some of its features are:
◆
900 MHz Digital Narrow Band technology
◆
30 Simultaneous channels
◆
LCD that wraps using 2 lines, total of 32 characters
◆
Four displayed operation modes, including Message
Waiting (MW)
◆
Hold, MSG (LCD icon), Cnf/Trn, and Mute buttons
◆
Headset jack (headset optional)
◆
Five handset ring modes, including a vibration
mode
◆
Simultaneous charging of handset and spare batteries
◆
Wall-mount or desktop unit with wall-mount plate, and belt clip included.
Cordless Telephone Installation (DKT2004-CT and
DKT2104-CT)
Important! Your telephone system must be programmed for Auto Preference for your TALK button to
work. If there is a shared digital telephone, you receive internal system dial tone
automatically after picking up the handset of your deskset. For example, in a Strata CTX
system, Program 32 must have a setting other than “00.” It is best to set Auto Line
Preference to access Intercom dial tone.
➤
To install the cordless telephone
1. Select a location for your cordless digital telephone. Avoid excessive heat or humidity. For wall
mounting, refer to the following section.
2. Place the cordless digital telephone’s base unit on a desk or tabletop near a standard 120VAC
outlet and within reach of the digital telephone line connection to your Strata CTX system.
3. Keep the base unit and handset away from sources of electrical noise (motors, fluorescent lighting,
etc.).
Important! Place the cordless telephone to the right of the DKT. If placed on the left of the DKT, the
cordless antenna will pick up a tone due to its close proximity to the DKT speaker and
electronic parts.