Home Automation Interface
Audio/Video
268
For each light, there are four options: On, Off, Dim, Bright.
❖
To turn the light on, press the On button next to the light you wish to turn on.
❖
The same process is used for turning the light off.
The dim and bright features only apply to certain electrical switch plates that support
these functions. If the switch plate that the light is plugged into does not support dim and
bright, then pressing these buttons will have no effect on the light. If these features are
supported, the dim and bright buttons will decrease or increase the light until it is either
completely off or at its brightest level.
When a light has been dimmed and subsequently turned off, the next time the light is
turned on, it will be in the same dimmed state. To return the light to it brightest, press the
Bright button.
Audio/Video
The Magnia SG20 Digital Central interface allows you to directly manipulate Audio/Video
equipment that is controlled through an Infrared (IR) interface (if configured on your
home automation controller). To control IR configured equipment, use a web browser on
a client computer or PDA to access your Magnia SG20 Digital Central web site.
The interface for controlling audio and video equipment via Digital Central was designed
to replicate the use of a normal remote control as much as possible. The same interface
is used no matter which device you are controlling (for example, the interface does not
change when you move from a DVD player to a stereo).
❖
To control an audio or video device, click
Audio/Video
from Home Automation. A
drop-down list of available audio/video devices displays in the left hand side of the
main audio/video page. The list is in alphabetical order and will default to the device
with the highest alphabetical name (for example, Bedroom TV will come before Den
TV.)
