background image

48

USING THE ANSWERING MACHINE

Answering System

LEAVING A MEMO MESSAGE

You can use the base unit to record a memo (up to 10 minutes), as a
reminder to yourself or as a message for someone else in the
household. A memo is stored and played back like any other incoming
message, and the LED display will blink to indicate that a message
has been received.

1

Press and hold 

till a beep sounds.

You hear a beep. 

2

Begin speaking close to the microphone.

3

When you finish recording, press 

or 

.

RECORDING A PHONE CONVERSATION (2 WAY REC)

You can record a telephone conversation that is already in progress
with the handset (up to 10 minutes). The conversation is stored and
played back like an incoming message.

1

During a call with the handset, press and hold 

till a beep

sounds. Recording starts and both parties hear the intermittent
beeps. 

2

To stop recording, press  

or 

.

You hear a beep.

NOTE: You can not record a conversation while you are speaking on the base.

PLAY/STOP

MEMO

MEMO

PLAY/STOP

MEMO

MEMO

SG-1991.qxd  7/4/1 7:29 PM  Page 48

Summary of Contents for SG-1991




























































Reviews: