Toshiba SD-2550A, Service Manual

Page: 53 / 109

2-5
2. REPLACEMENT OF MECHANICAL PARTS (TYPE B)
<Mounting >
1. The spring for tray side pressure is inserted into the
portion “A”. (Refer to Fig. 2-1-12.)
2. By referring to Fig. 2-1-13, insert the spring normally
and mount the clamper stay.
Fig. 2-1-13
2-1. Cabinet Replacement
2-1-1. Top Cover
1. Remove seven screws (1) and remove the top cover (2).
Fig. 2-1-11
2-1-2. Clamper Stay
<Removal>
1. Remove two screws (1).
2. Release two claws and remove the clamper stay (2).
Fig. 2-1-12
Screw (1)
Top cover (2)
Screws (1)
Screw (1)
Clamper stay (2)
Screws (1)
A
Clamper
stay (2)
Claw
Clamper stay (2)
Claw
Spring
Claws
OK
Tray
NG
Spring
Mechanism
chassis assembly
NG
This part should be touched
to the left side of the tray.
OK
NG
Press down by finger
unitil fix the clamper assembly
No floating
Floating NG