manualshive.com logo in svg

Toshiba Satellite S300L Series, User Manual

Share
Download
Toshiba Satellite S300L Series User Manual Download Page 182

G-4

User’s Manual

S300L

Wireless LAN

*8

The transmission speed over the wireless LAN and the distance over which 
wireless LAN can reach may vary depending on surrounding 
electromagnetic environment, obstacles, access point design and 
configuration, and client design and software/hardware configurations.

The actual transmission speed will be lower than the theoretical maximum 
speed.

The wireless adapter is based on a draft 2.0 release version of the 
IEEE 802.11n specification and; may not be full compatible with, or support 
some feature (e.g., security) of, certain Wi-Fi equipment.

Copy Protection

*9

Applicable copy protection standards included in certain media may 
prevent or limit recording or viewing of the media.

Images

*10

All images are simulated for purposes of illustration.

Summary of Contents for Satellite S300L Series











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands