38
Getting Started
Connecting to a power source
Please handle your computer carefully to avoid
scratching or damaging the surface.
Connecting to a power source
Your computer requires power to operate. Use the power
cord/cable and AC adaptor to connect the computer to a live
electrical outlet, or to charge the computer’s battery.
Never pull on a power cord/cable to remove a plug from
a socket. Always grasp the plug directly. Failure to follow
this instruction may damage the cord/cable, and/or result
in a fire or electric shock, possibly resulting in serious
injury.
Always confirm that the power plug (and extension cable
plug if used) has been fully inserted into the socket, to
ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use the TOSHIBA AC adaptor that was provided
with your computer, or use AC adaptors specified by
TOSHIBA to avoid any risk of fire or other damage to the
computer. Use of an incompatible AC adaptor could
cause fire or damage to the computer possibly resulting
in serious injury. TOSHIBA assumes no liability for any
damage caused by use of an incompatible adaptor.
To connect AC power to the computer:
1
Connect the power cord/cable to the AC adaptor.
Handling the cord on this product will expose you to
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
Wash hands after handling
.
NOTE
