128
If Something Goes Wrong
Develop good computing habits
4
Click or touch
System Restore...
5
Click or touch
Next
.
6
Click or touch the Restore point you want to use then
click or touch
Next
.
The time stamp and description of each Restore point is
displayed.
At this point you can click or touch “Scan for affected
programs” to determine what the impact of using the
chosen Restore Point will be.
7
Verify that the Restore point you chose is the correct
one. If it is not, click or touch
Back
to return to the
previous step.
8
Close all programs and save all open files.
9
Click or touch
Finish
, and then
Yes
to begin the system
restore.
Your Windows
®
operating system configuration will now
be restored to the state it was in when the chosen
restore point was created, and then the computer will be
automatically restarted.
Backing up your data or your entire
computer with the Windows
®
operating
system
The most valuable component of your computer system is
the data you create and store on its internal storage drive.
Since problems with either hardware or software can make
the data inaccessible or even destroy it, the next most
valuable component of your computer system may be a
recent backup of your data.
Fortunately, the Windows
®
operating system offers a
convenient way to back up your computer or just your
important files to optical disc drives, or hard drives. An
external hard drive is recommended in case the internal
storage drive fails. No additional software is required. Most
of the optical disc drives built into recent Toshiba portable
computer models can write to (or ‘burn’) as well as read from
optical discs. External optical disc writers are also widely
available.
NOTE
