User’s Manual
3-31
Features, Utilities and Options
Tablet PC Pen
Use it as a spare to your computer. Spare pen tip and draw-out tool are
included. Refer to Chapter 4,
, for the detailed usage.
Reserve Pen
Supplied pen uses a pen instead of Supplied pen at the time of loss or
breakage. Refer to Chapter 4,
, for the detailed usage.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps below.
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
Figure 3-19 Connecting the monitor cable to the external monitor port
3. Turn the monitor’s power on.
4. Turn the computer’s power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
However, the Windows Desktop appears on a display device that you used
last time to shut down your computer, if the display device exists when you
turn on the power.
To change the display settings, press
Fn
+
F5
. If you disconnect the
external monitor before you turn the computer’s power off, be sure to press
Fn
+
F5
to switch to the internal display. Refer to Chapter 5,
for details on using hot keys to change the display setting.
External monitor
port
Monitor cable
