manualshive.com logo in svg

Toshiba Satellite Pro S750 Series, User Manual

The Toshiba Satellite Pro S750 Series User Manual is your essential guide to understanding and maximizing the features of this high-performance laptop. Download this detailed manual for free from manualshive.com to effortlessly navigate through your device's functionalities, ensuring a seamless user experience.

Share
Download
background image

User’s Manual

1-8

Getting Started

Turning off the power

The power can be turned off in one of three modes, either Shut Down 

Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and 

the computer will boot to the operating system's main screen the next time 

it is turned on.
1. If you have entered data, either save it to the hard disk drive or to other 

storage media.

2. Make sure all disk/disc activity has stopped before removing the 

CD/DVD.

3. Click 

Start

. 

4. Click the 

Shut down

 button (

).

5. Turn off any peripheral devices connected to your computer.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without 

exiting from your software by placing the computer into Sleep Mode. In this 

mode data is maintained in the computer's main memory so that when you 

turn on the power again, you can continue working right where you left off.

■

Make sure the 

Hard Disk Drive

/

Optical Disc Drive

 indicators are off. 

If you turn off the power while a disk (disc) is being accessed, you may 

lose data or damage the disk.

■

Never turn off the power while an application is running. Doing so could 

cause loss of data.

■

Never turn off the power, disconnect an external storage device or 

remove storage media during data read/write. Doing so can cause data 

loss.

Do not turn the computer or peripheral devices back on immediately - wait 

a short period to avoid any potential damage.

When you have to turn off your computer aboard an aircraft or in places 

where electronic devices are regulated or controlled, always completely 

shut down the computer. This includes turning off any wireless 

communication switches or devices, and canceling settings that reactivate 

the computer automatically, such as a timer recording function. Failure to 

completely shut down the computer in this way could allow the operating 

system to reactivate and run pre-programmed tasks or preserve unsaved 

data, which could interfere with aviation or other systems, possibly causing 

serious injury.

Summary of Contents for Satellite Pro S750 Series













































































































































































































Reviews:

No comments

Related manuals for Satellite Pro S750 Series

NEC VERSA LX AGP VIDEO - Important Information Manual preview
VERSA LX AGP VIDEO -
Brand: NEC Pages: 14
Acer Aspire 5670 Service Manual preview
Aspire 5670
Brand: Acer Pages: 135
Acer CB514-2HT-K0FZ User Manual preview
CB514-2HT-K0FZ
Brand: Acer Pages: 14
Acer CB315-4H User Manual preview
CB315-4H
Brand: Acer Pages: 14
Acer Chromebook 515 User Manual preview
Chromebook 515
Brand: Acer Pages: 15
Acer ConceptD 3 Ezel Manual preview
ConceptD 3 Ezel
Brand: Acer Pages: 10
Acer Chromebook 317 User Manual preview
Chromebook 317
Brand: Acer Pages: 14
Acer CB515-1H User Manual preview
CB515-1H
Brand: Acer Pages: 31
Acer Chromebook Spin 13 User Manual preview
Chromebook Spin 13
Brand: Acer Pages: 36
Acer Chromebook 311 User Manual preview
Chromebook 311
Brand: Acer Pages: 13
bto x-book 17CL50 User Manual preview
x-book 17CL50
Brand: bto Pages: 316
Fujitsu LIFEBOOK P3110 Upgrade preview
LIFEBOOK P3110
Brand: Fujitsu Pages: 36
Dell 1526 - Inspiron - Laptop Service Manual preview
1526 - Inspiron - Laptop
Brand: Dell Pages: 51
Dell 1720 - Vostro - Core 2 Duo 2.2 GHz Service Manual preview
1720 - Vostro - Core 2 Duo 2.2 GHz
Brand: Dell Pages: 66
Dell 1737 - Studio - Laptop Service Manual preview
1737 - Studio - Laptop
Brand: Dell Pages: 47
Dell Inspiron 4000 Solution Manual preview
Inspiron 4000
Brand: Dell Pages: 96
Dell Inspiron 3800 System Reference Manual preview
Inspiron 3800
Brand: Dell Pages: 161
Dell Inspiron 4000 Service Manual preview
Inspiron 4000
Brand: Dell Pages: 63

Brands by name

Popular brands

Load more brands