Toshiba Satellite Pro L550 User Manual Download Page 74

Page: 74 / 232

Getting Started

Using the TouchPad™

Installing drivers and applications

The Toshiba Application Installer allows you to reinstall the drivers
and applications that were originally bundled with your computer.

To reinstall drivers and applications:

Click

Start

All Programs

Toshiba

, and then

TOSHIBA

Application Installer

Click

Next

Click the item you want to install.

Click

Install

Follow the on-screen prompts to complete the installation
process.

Using the TouchPad™

You can use the TouchPad™ (the small, touch-sensitive area in
front of the keyboard) and the adjacent control buttons to:

❖

Move the pointer on the screen

❖

Select an item on the screen

❖

Open or activate an item on the screen

❖

Scroll through a document or information

(Sample Illustration) The TouchPad and associated control buttons

Secondary control button

Primary control button

TouchPad™

Summary of Contents for Satellite Pro L550









































































































































































































































Search results

Summary of Contents for Satellite Pro L550

Reviews:

Toshiba Satellite Pro L550, User Manual, Page: 74 / 232

Search results

Summary of Contents for Satellite Pro L550

Reviews: