manualshive.com logo in svg

Toshiba Satellite Pro L550, User Manual

Share
Download
Toshiba Satellite Pro L550 User Manual Download Page 47

47

Getting Started

Connecting to a power source

To connect AC power to the computer:

1

Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC 
adaptor

Handling the cord on this product will expose you to lead, a 
chemical known to the State of California to cause birth defects or 
other reproductive harm. 

Wash hands after handling

.

2

Plug the AC adaptor cord into the DC-IN on the side of the 
computer.

(Sample Illustration) Connecting the AC adaptor cord to the 
computer

3

Connect the power cord/cable to a live electrical outlet.

The AC power light on the indicator panel glows green.

Never attempt to connect or disconnect a power plug with wet hands. 
Failure to follow this instruction could result in an electric shock, 
possibly resulting in serious injury.

_

+

Summary of Contents for Satellite Pro L550









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands