Toshiba Satellite Pro C640 User Manual Download

Page: 96 / 169

User’s Manual

4-29

Operating Basics

Connecting LAN Cable

To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices

connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear

the latch click into place.

Connecting the LAN cable

3. Plug the other end of the cable into a LAN hub connector. Check with

your LAN administrator before connecting to a hub.

■

Connect the AC adaptor before connecting the LAN cable. The AC

adaptor must remain connected during LAN use. If you disconnect the

AC Adaptor while the computer is accessing a LAN, the system may

hang up.

■

Do not connect any other cable to the LAN jack except the LAN cable.

Otherwise, malfunctions or damage may occur.

■

Do not connect any power supplying device to the LAN cable that is

connected to the LAN jack. Otherwise, malfunctions or damage may

occur.

1. LAN jack

Summary of Contents for Satellite Pro C640










































































































































































Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands

Toshiba Satellite Pro C640, User Manual

Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands