Toshiba Satellite Pro C640 User Manual Download

Page: 49 / 169

User’s Manual

3-4

Hardware, Utilities and Options

Keyboard

Pointing Device

Power

Ports

Slots

Built-in

104 keys or 105 keys, compatible with IBM

enhanced keyboard, dedicated cursor

control,

and

keys. See Chapter 5,

The

Keyboard

, for details.

Built-in

A touchpad and control buttons in the palm rest

enable control of the on-screen pointer.

Battery pack

The computer is powered by one rechargeable

lithium-ion battery pack.

RTC battery

The internal RTC battery backs up the Real Time

Clock (RTC) and calendar.

AC adaptor

The universal AC adaptor provides power to the

system and recharges the batteries when they

are low. It comes with a detachable power cord.

Because it is universal, it can receive a range of

AC voltage between 100 and 240 volts.

Headphone

Enables connection of a stereo headphone.

Microphone

Enables connection of a microphone.

External monitor

15-pin, analog VGA port.

Universal Serial Bus

(USB 2.0) ports

Two Universal Serial Bus (USB) enable a chain

connection of USB-equipped devices to your

computer through the ports.

Bridge media slot

This slot allows you to easily transfer data from

devices, such as digital cameras and Personal

Digital Assistants, that use flash memory (Secure

Digital (SD)/Secure Digital High Capacity

(SDHC)/Secure Digital Extended Capacity

(SDXC)/MultiMediaCard (MMC)). See

Bridge

Media Slot

in this Chapter for details.

Summary of Contents for Satellite Pro C640










































































































































































Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands

Toshiba Satellite Pro C640, User Manual

Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands