Toshiba Satellite Pro C600 Series User Manual Download Page 33

Page: 33 / 161

User’s Manual

2-1

Satellite C600/C640/C645/C600D/C640D/C645D, Satellite Pro C600/C640/C600D/C640D

Chapter 2

The Grand Tour

This chapter identifies the various components of the computer - it is
recommended that you become familiar with each before you operate the
computer.

Front with the display closed

The following figure shows the computer’s front with its display panel in the
closed position.

Figure 2-1 Front of the computer with display panel closed

Legal Footnote (Non-applicable Icons)

For more information regarding Non-applicable Icons, please refer to the
Legal Footnotes section in Appendix E.

Please handle your computer carefully to avoid scratching or damaging the
surface.

1. System indicators

System indicators

These LED indicators allow you to monitor the
status of various computer functions and are
described in more detail within the

System

indicators

section.

Summary of Contents for Satellite Pro C600 Series

































































































































































Search results

Summary of Contents for Satellite Pro C600 Series

Reviews:

Related manuals for Satellite Pro C600 Series

Brands by name

Popular brands

Toshiba Satellite Pro C600 Series, User Manual

Search results

Summary of Contents for Satellite Pro C600 Series

Reviews:

Related manuals for Satellite Pro C600 Series

Brands by name

Popular brands