manualshive.com logo in svg

Toshiba Satellite P20, User Manual

Share
Download
Toshiba Satellite P20 User Manual Download Page 103

 

Expanding & Upgrading 

User's Manual 

6-6 

Satellite P20

 Version 

1

 Last Saved on 30/05/2003 13:57 

ENGLISH using Euro_M.dot –– Printed on 30/05/2003 as T202014-EN 

Connecting Audio Devices 

The audio jacks on the left side of the computer allow you to connect 
several devices including speakers and a microphone. 

Connecting external speakers 

You can connect self-powered stereo speakers to the computer to 
provide better sound reproduction than that from the built-in speakers 
and save wear on them. 

 

 

 

 

 

 HEADPHONE 

JACK  

 

To connect self-powered external speakers do as follows: 

1. 

Position the speakers where you want them.

 

2. 

Plug the mini-plug connector from the speakers into the Headphone 
Jack on the left side of the computer.

 

3. 

Plug the speakers into a power source.

 

4. 

Turn on the computer and adjust the volume from the volume control 
in the taskbar system tray. You may want to play something to check 
the volume level.

 

The internal speakers are disabled when you connect external speakers 
to the Headphone Jack. 

Summary of Contents for Satellite P20















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands