manualshive.com logo in svg

Toshiba Satellite P20, User Manual

Share
Download
Toshiba Satellite P20 User Manual Download Page 100

 

Expanding & Upgrading 

User's Manual 

6-3 

Satellite P20

 Version 

1

 Last Saved on 30/05/2003 13:57 

ENGLISH using Euro_M.dot –– Printed on 30/05/2003 as T202014-EN 

Connecting An External USB Pointing Device 

You can install an external USB pointing device, such as a mouse, to use 
instead of, or in addition to, the built-in Touch pad device. You can use 
any type of pointing device as long as it has a USB interface.  

 

 

 

 

 

 

RIGHT USB PORTS 

REAR USB PORTS 

 

To install an external USB pointing device do as follows: 

1. 

Plug the device into one of the USB ports on the computer. We 
recommend right-handed users attach the device to the USB port on 
the right-hand side of the computer; left-handed users may find it 
more convenient to use one of the USB ports on the rear.

 

2. 

The device may require a driver and possibly other software. Install it 
according to the instructions that come with it.

 

3. 

Position the device where you want to use it.

 

You don’t have to turn off the computer to connect or disconnect USB 
devices. 

  

Summary of Contents for Satellite P20















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands