Toshiba Satellite M70 User Manual Download Page 57

Page: 57 / 176

User’s Manual

3-5

Getting Started

Connecting the AC adapter

Attach the AC adapter when you need to charge the battery or you want to

operate from AC power. It is also the fastest way to get started, because

the battery pack will need to be charged before you can operate from

battery power. The AC adapter can be connected to any power source

supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the

AC adapter to charge the battery pack, refer to Chapter 6,

Power and

Power-Up Modes

1. Connect the power cord to the AC adapter.

Connecting the power cord to the AC adapter

2. Connect the DC output plug on the AC adapter to the

DC IN

input port

on the back of the computer.

Connecting the adapter to the computer

3. Plug the power cord into a live wall outlet. The

Battery

and

DC IN

indicators on the front of the computer should glow.

Use of the wrong adapter could damage your computer. TOSHIBA

assumes no liability for any damage in such case. The output rating for the

computer is 19 volts DC.

Summary of Contents for Satellite M70

















































































































































































Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands

Toshiba Satellite M70, User Manual

Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands