95
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
❖
Hold a disc by its outside edge. Fingerprints on the
surface can prevent the DVD-ROM drive or multi-
function drive from reading the data properly.
❖
Do not expose discs to direct sunlight or extreme heat or
cold.
❖
To clean a disc that is dirty, wipe it with a clean, dry
cloth. The most efficient method to clean it is to start
from the center of the disc and wipe toward the outward
edge (not in a circle). If necessary, moisten the cloth with
water or a neutral cleaner (not benzine or rubbing
alcohol). Let the disc dry completely before inserting it in
the drive.
Powering down the computer
Pushing the power button before shutting down the Windows
operating system could cause you to lose your work. Make
sure the system indicator panel’s disk light and the drive in use
light are off. If you turn off the power while a disk is being
accessed, you may lose data or damage the disk and/or drive.
When you power down the computer, you have three options
to choose from: Turn Off (or Shut Down) Computer, Standby,
and Hibernation.
TECHNICAL NOTE: Before using any of these options to power
down your computer, save your files and make sure the disk
activity lights are off.
If you change your mind and decide to continue working after
all, wait a few seconds before turning the computer on again.
