background image

27

Adding memory (optional)

5.375 x 8.375 ver 3.1

Avoid touching the connector on the memory module or on the 
computer. Grease or dust on the connector may cause memory 
access problems.

9

Carefully remove the new memory module from its antistatic 
packaging, without touching its connector.

10 Locate an empty memory module slot on the underside of the 

computer.

If no memory slot is available, you must remove a module by 
performing steps 2-3 of “Removing a memory module” on page 29.

For this model Slot A is the bottom slot. Slot B is the top slot. If only 
one memory module is to be installed, it must be installed in slot A.

11 Pick up the memory module by its sides, avoiding any contact 

with its connector. Position the module toward the socket, 
aligning the connector’s notch with the matching key in the 
socket.

(Sample Illustration) Aligning the memory module with the socket

12 Firmly press the memory module into the memory slot’s socket 

at approximately a 30-degree angle (to the horizontal surface 
of the computer).

(Sample Illustration) Inserting the memory module into the socket

latch

latch

key

notch

connector

Summary of Contents for Satellite M205-SP3018





















































Reviews: