When opening or closing the display panel, place one hand on the
palm rest to hold the computer in place and use the other hand to
slowly open or close the display panel (Do not use excessive force
when opening or closing the display panel).
Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status. Please refer to the
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
1.
Open the display panel.
2.
Press and hold the computer's power button for two or three seconds.
Figure 1-6 Turning on the power (Satellite L770/L775/L770D/L775D/Satellite Pro
L770/L775/L770D/L775D)
1
1. Power button
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
User's Manual
1-6
