Toshiba Satellite L100-108 User Manual Download

Page: 50 / 186

2-6

User’s Manual

The Grand Tour

Front with the display open

This section shows the front of the computer with the display open. Refer to

the appropriate illustration for details. To open the display, slide the display

latch on the front of the display and lift up. Position the display at a

comfortable viewing angle.

The front of the computer with the display open

Display Screen

System Indicators

Touch Pad

Power Button

Keyboard

Indicators

Touch Pad Control

Buttons

Audio/Video

Control Buttons

Power Button

Turns the computer on and off as well as puts it

into Hibernation mode and wakes it up from said

mode.

Display Screen

The LCD displays high-contrast text and

graphics. Refer to Appendix B,

Display Controller

and Modes

. When the computer operates on AC

power, the display screen’s image will be

somewhat brighter than when it operates on

battery power. The lower brightness level is

intended to save battery power.

Audio/Video Control

Buttons

button: Plays the previous track/

chapter/data.
Next

button: Plays the next track/chapter/

data.
Play/pause

button: Begins or pauses

playing.
Stop button: Stops playing.
Refer to Chapter 4,

Operating Basics

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands