Toshiba Satellite L100-108 User Manual Download

Page: 124 / 186

8-2

User’s Manual

Optional Devices

PC card

The computer is equipped with a PC Card slot that can accommodate one

Type II card. Any PC Card that meets industry standards (manufactured by

TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC

Cards, including PC Card 16’s multifunction card and CardBus PC Cards.
CardBus supports the new standard of 32-bit PC Cards. The bus provides

superior performance for the greater demands of multimedia data

transmission.

Inserting a PC Card

The PC Card slot is located on the left side of the computer.
Windows

hot-install feature lets you insert PC Cards while the computer’s

power is on.

To insert a PC Card, follow the steps below.
1. Insert the PC Card.
2. Press gently to ensure a firm connection.

Inserting the PC Card

After inserting the card, refer to the card’s documentation and check the
configuration in Windows

to make sure it is appropriate for your card.

■

Do not insert a PC Card while the computer is in standby or Hibernation

Mode. Some cards might not work properly.

■

A hard disk drive or optical media drive connected to a 16-bit PC Card

might affect the performance of the computer’s sound system and

modem data transmission, including slower transmission speeds and

dialing errors.

PC Card

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands