Toshiba Satellite E100 Series Maintenance Manual Download Page 92

Page: 92 / 236

3.3 Options

3 Diagnostic Programs

Repeat times of the test item.

•

Interactive

If the item is enabled during the test, the test items that need user to response can

run normally, such as PS2 Mouse test; If it is disabled, those test items will
report FAIL.

Whether the option here is enabled, it only affects the current test item.

•

Parameters

For the test items with specific parameters, this option will call the related

configuration screens. Otherwise, the program will show the following dialogue
window:

Parameters for the specific test items:

Some test items (Memory, HDD, e g...) have their individual parameters, which

can be configured in their parameters setting window.

3.3.4 Load Batch Parameters

Batch parameter is saved in the script file whose extension name is INI (*.INI).
Below is the screen shot of “Load Batch Parameters”.

Satellite E100 Maintenance Manual

Summary of Contents for Satellite E100 Series













































































































































































































































Search results

Summary of Contents for Satellite E100 Series

Reviews:

Toshiba Satellite E100 Series, Maintenance Manual, Page: 92 / 236

Search results

Summary of Contents for Satellite E100 Series

Reviews: