Toshiba Satellite E100 Series Page 134 Maintenance Manual Download

Page: 134 / 236

3.11Error Codes and Description

3 Diagnostic Programs

Satellite E100 Maintenance Manual

Keyboard Map & Stroke
Test Fail

Keyboard Map & Stroke Test
fails.

Check the KBD connection and
repeat the test.

Clock Line Test Fail

Clock Line Test fails.

As above.

Data Line Test Fail

Data Line Test fails.

As above.

05xx

Mouse

Touch Pad Test Fail

Check the mouse connection and
repeat the test.

28xx

1394

Can not find IEEE1394
controller

Don’t support 1394.

20xx

IDE-HDD

Get Parameter Fail !

Wrong test parameters are input
by user.

Reinput the correct parameters.

Write Pattern Error

HD is damaged.

Send the HD for repair.

Data Compare Error

HD is damaged.

As above.

Read Verify Error

HD is damaged.

As above.

Seek Error

HD is damaged.

As above.

Disk Controller Self Test
Failed

The HD controller is damaged.

As above.

Disk Controller Test
unexpected interrupt
Failed

The HD controller is damaged.

As above.

Disk Controller action
Test Failed

The HD controller is damaged.

As above.

Disk dos not support
SMART

Disk dos not support SMART

Change HD which supported
SMART and test again

Disk read attribute
threshold error

Disk read attribute threshold
error

Send the HD for repair.

Disk read attribute value
error

Disk read attribute value error

As above.

Disk SMART attribute
value error

Disk SMART attribute value
error

As above.

21xx

ODD

No Disk in CDROM

No disk is found in the CD-
ROM.

Insert a disk into the CD-ROM.

The Disk in CDROM is
not Data Disk

The disk in the CD-ROM is not
Data Disk.

Insert a DATA CD.

IDE-CD Controller Error Functional errors with the CD-

ROM.

Send the CD-ROM for repair.

CD Read Error

Either the disk or the CD-ROM
is damaged.

Replace the disk or send the CD-
ROM for repair.

CD Seek Error

Either the disk or the CD-ROM
is damaged.

Replace the disk or send the CD-
ROM for repair.

Summary of Contents for Satellite E100 Series













































































































































































































































Search results

Summary of Contents for Satellite E100 Series

Reviews:

Related manuals for Satellite E100 Series

Brands by name

Popular brands

Toshiba Satellite E100 Series, Maintenance Manual

Search results

Summary of Contents for Satellite E100 Series

Reviews:

Related manuals for Satellite E100 Series

Brands by name

Popular brands