User’s Manual
3-22
Satellite A660/A665
Installing a memory module
To install a memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the
Power
indicator is off (refer to
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
section in Chapter 6,
, if required).
5. Loosen the one screw securing the memory module cover in place -
please note that this screw is attached to the cover in order to prevent it
from being lost.
6. Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-3 Removing the memory module cover
Use a point size 0 Phillips screwdriver.
1. Memory module cover
2. Screw
1
2
