manualshive.com logo in svg

Toshiba Satellite A350 Series, Maintenance Manual

Share
Download
Toshiba Satellite A350 Series Maintenance Manual Download Page 178

Error! Style not defined. Error! Style not defined. 

4 Replacement Procedures 

4.1 

General 

This chapter explains how to disassemble the laptop and replace Field Replaceable Units (FRUs). 
Some replacement procedures may not require you to remove all the surrounding FRUs to 
replace only one FRU. The chart below shows the FRUs in the order in which they should be 
removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the 
top area of the chart should normally be removed before removing the FRUs shown in the 
bottom area. To replace the FRUs, first identify the suspect FRU for the system failure. Next, 
according to this chart, determine the FRUs that need to be removed before removing the suspect 
FRU. After you determine those FRUs, go to the appropriate sections according to the section 
numbers shown in the boxes. Then start removal and replacement. 

 

How to use the chart (two examples):  

•

  For removing the Motheroard: 

  First, remove parts from 4.8 

Keyboard Cover & Keyboard, 4.9 
Logic Upper Assembly, 4.13 
Thermal Fan.  

•

  For removing the LCD Module: 

  First, remove LCD Bezel Assembly, 

then remove the LCD module and 
the Inverter Board. 

Satellite A350D Maintenance Manual 

4-1 

Downloaded from LpManual.com Manuals

Summary of Contents for Satellite A350 Series










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands