Toshiba Satellite A350 Series Maintenance Manual Download Page 143

Page: 143 / 297

3. Tests and Diagnostics

3.7 Main Battery Change Test

3.6 Main Battery Charge Test

NOTE: The AC adaptor should be connected to successfully run this test

1.>. 90W with 19V DC for UMA SKU

2.>- 120W with 19V DC for discrete SKU

This test shows and measures the main battery:

Battery type (Lion)

Manufacturer (Sanyo/Panasonic/Sony)

Remain charge capacity (0 ~ 100%)

Charge function (PASS/FAIL)

- “Battery Is Full” showed when “remain charge capacities” is 100%

The screen should display as below, if the charge function is OK, will show:.

If the charge function is NG, the screen will display as:

Downloaded from LpManual.com Manuals

Summary of Contents for Satellite A350 Series










































































































































































































































































































Search results

Summary of Contents for Satellite A350 Series

Reviews:

Related manuals for Satellite A350 Series

Brands by name

Popular brands

Toshiba Satellite A350 Series, Maintenance Manual

Search results

Summary of Contents for Satellite A350 Series

Reviews:

Related manuals for Satellite A350 Series

Brands by name

Popular brands