manualshive.com logo in svg

Toshiba Satellite A300D Series, User Manual

Share
Download
Toshiba Satellite A300D Series User Manual Download Page 73

User’s Manual

4-16

Operating Basics

Using the optical disc drive

The full-size drive provides high-performance execution of CD/DVD-based 

programs. You can run either 12 cm (4.72") or 8 cm (3.15") CDs without an 

adaptor. An ATAPI interface controller is used for CD/DVD operation. When 

the computer is accessing a CD/DVD, an indicator on the drive glows.
Refer also to the 

Writing CD/DVD with the DVD Super Multi drive

 section 

for

 

precautions on writing to CD/DVD.

Loading discs 

To load a disc, follow the steps below. 
1. a.  When the power is on, press the eject button to open the drawer 

slightly. 

Pressing the eject button 

b. Pressing the eject button will not open the drawer when the disc 

drive's power is off. If the power is off, you can open the drawer by 

inserting a slender object (about 15 mm) such as a straightened 

paper clip into the eject hole just to the right of the eject button. 

Eject Button

Summary of Contents for Satellite A300D Series




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands