Toshiba Satellite A300D Series User Manual Download Page 27

Page: 27 / 179

User’s Manual

1-6

Introduction

Keyboard

Pointing Device

Ports

Graphics Controller

Graphics controller maximizes display

performance. Refer to Appendix B,

Display

Controller

for more information.

Built-In

TOSHIBA Vista keyboard, 86 keys or 87 keys,

compatible with IBM enhanced keyboard,

embedded numeric overlay, dedicated cursor

control,

and

keys. Refer to Chapter 5,

The Keyboard

, for details.

Built-In TouchPad

A TouchPad and control buttons in the palm rest

enable control of the on-screen pointer and

scrolling of windows.

External Monitor

This 15-pin port lets you connect an external

video display.

HDMI

This HDMI jack allows you to connect external

display/audio devices. (Provided with some

models)

Universal Serial Bus

(USB 2.0)

The computer has Universal Serial Bus ports that

comply with the USB 2.0 standard, which enables

data transfer speeds 40 times faster than the

USB 1.1 standard. (The ports also support

USB 1.1.)

eSATA/USB combo

port

eSATA/USB combo port supports the USB 2.0

and the eSATA function.

i.LINK (IEEE1394a)

This port enables high-speed data transfer

directly from external devices such as digital

video cameras.

TV Out

The 4-pin S-Video port is compatible with PAL or

NTSC TV standard, supporting Macrovision 7.02

copy protection. (Provided with some models.)

Infrared receiver

window

This window receives signals from the remote

control which is provided with your computer.

(Provided with some models.)

Summary of Contents for Satellite A300D Series




















































































































































































Search results

Summary of Contents for Satellite A300D Series

Reviews:

Related manuals for Satellite A300D Series

Brands by name

Popular brands

Toshiba Satellite A300D Series, User Manual

Search results

Summary of Contents for Satellite A300D Series

Reviews:

Related manuals for Satellite A300D Series

Brands by name

Popular brands