manualshive.com logo in svg

Toshiba Satellite 5200 Series, User Manual

Share
Download
Toshiba Satellite 5200 Series User Manual Download Page 169

  8-17

O

PTIONAL

 D

EVICES

Additional AC adaptor

If you frequently transport the computer between different sites such as your home
and office, purchasing an AC adaptor for each location will reduce the weight and
bulk of your carrying load.

Battery charger

The battery charger (PA3091U) provides a convenient way to charge battery packs
without requiring the use of your computer. The battery charger holds up to two
Lithium-ion battery packs.

TOSHIBA Style Bay HDD adaptor

A integrated 2 1/2" HDD  is available for  installation in the TOSHIBA Style Bay.

To install an HDD in the TOSHIBA Style Bay HDD adaptor follow the steps below.

1. Slide the lock to the unlock position and open the lid.

Figure 8-14  Opening the lid

TOSHIBA Style Bay HDD adaptor

Summary of Contents for Satellite 5200 Series









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands