44
Chapter 6: Using the TV’s features
Adding and clearing channels and inputs in the
History List
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser
™
adds it to the History List and displays it on the “right
side” of the Channel Browser
™
. Previously tuned
channels/inputs are “shifted” to the left, eventually
moving off the left side. Press
3
C
to surf backward through the previously tuned
channels/inputs. Any channel or input that is tuned
repeatedly will not be repeated in the History List but
instead will be moved to the end of the list on the right
side of the Channel Browser
™
.
The Channel Browser
™
will store the following
channels:
•All channels that are tuned using the numeric buttons
on the remote control.
•All channels that are tuned for at least 5 seconds using
<
or
,
on the remote control.
Note:
Whenever an item is selected that cannot be tuned
(for various reasons), the TV will automatically tune to the
previously viewed channel or input.
Clearing channels from the History List:
•Reconfiguring the
ANT/CABLE
input will clear the
History List.
Note:
See page 37
for details on configuring the antenna
input.
•Once 32 channels or inputs are stored in the History
List, the oldest item will be removed from the list
when a new channel or input is tuned.
•Turning off the TV will clear the History List.
Setting the Channel Tuning Mode
This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV is
in Antenna mode.
Note:
To use this feature,
ANT/CABLE In
must be set to
Antenna
(
-
page 37).
The channel tuning mode has three options.
To set the Channel Tuning Mode:
1
From the
SETUP
menu, highlight
TV Settings
and
press
T
.
2
Press
B
or
b
to highlight
Channel Tuning Mode
.
3
Press
C
or
c
to select your desired mode and then
press
O
.
Note:
The Channel Options window as well as the Channel
Browser ANT/CABLE List will be updated automatically
when you change the mode. Also, the History List will be
cleared, but the Favorites List will be saved.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press
<
or
,
on the remote control or TV control panel.
Note:
This feature will not work unless you program
channels into the TV’s channel memory (
-
page 37).
Mode
Description
Standard
Both analog and digital channels can be
tuned normally
Auto
(default)
Digital channels will have priority
when manually entering a channel
number using the Channel Numbers (0-
9) on the remote control, analog
channels can still be tuned by
<
/
,
if
available
Digital
Only digital channels can be tuned