Toshiba RBC-U33P-E Installation Manual Download Page 7

- 7 -

4. Other descriptions

 

„

Check after installation

•  Check again there is no clearance between the indoor unit and the ceiling panel, and between the ceiling panel and the 

ceiling surface.

*  A clearance causes water leak or dewing.

•  Check the cables are connected surely.

*  Incomplete connection causes such a trouble as the louver does not work.

•  Failure to fit some claws cause dew drops.

 

„

For wireless remote controller kit

•  For details of installation, refer to the Installation Manual attached to the wireless remote controller kit (sold separately).

 

„

For Air puri

fi

 er kit

•  For details of installation, refer to the Installation Manual attached to Air purifier kit (sold separately).

 

„

For Occupancy sensor kit

•  For details of installation, refer to the Installation Manual attached to Occupancy sensor kit (sold separately).

 This product (Occupancy sensor kit) cannot be used together with the wireless remote controller kit and Air purifier kit.

Delivery to the customer

•  After confirmation of the above items, hand a set of this manual, manuals for the indoor unit, manual for products sold 

separately to the customer.

•  For cleaning of the filter, ask the maintenance professional.

1 1 3 0 6 0 5 1 0 1

Summary of Contents for RBC-U33P-E








Reviews: