18
TOSHIBA 1075000646_EN
EN
AUTOMATIC OPERATION (AUTO CHANGEOVER)
When you set the air conditioner in
mode or switch over from AUTO operation because of some settings change, it
will automatically select either cooling, heating, or fan only operation depending on the indoor temperature.
Start
1
1
1
1
1
button
Push this button to start the air conditioner.
2
2
2
2
2
Mode select button (MODE)
Select AUTO.
3
3
3
3
3
Temperature button
Set the desired temperature.
•
In case of cooling, start the operation after approx. 1 minute.
•
In case of heating, the operation mode is selected in accordance with the room temperature and operation starts
after approximately 3 to 5 minutes.
•
When you select the Auto mode, it is unnecessary to set the fan speed. The FAN speed display will show AUTO
and the fan speed will be automatically controlled.
•
When the room temperature reaches the set temperature and the outdoor unit stops, the supper low wind is
discharged and the air volume decreases excessively. During defrost operation, the fan stops so that cool air is not
discharged and “STAND BY” is displayed (also
lamp of main unit turned on).
•
If the Auto mode is uncomfortable, you can select the desired conditions manually.
Stop
Push
button.
Push this button again to stop the air conditioner.
When restarting the operation after stop
•
When restarting the operation immediately after stop, the air conditioner does not operate for approx.
3 minutes to protect the machine.
NOTE
1
2
3
01(EN)_1075000646 P14-20
7/16/04, 13:34
18
3