106
(2)
Front cabinet
1. Detachment
1) Following to work of Detachment of (1).
2) Remove the fixing screw (1 pc, M4 × 8 truss screw)
used to secure the front cabinet and inverter cover,
the screws (4 pcs, M4 × 10 hexagon screws) used
to secure the front cabinet at the bottom, and the
fixing screws (2 pcs, M4 × 8 truss screws) used to
secure the motor base.
• The front cabinet is fitted into the side cabinet (left)
at the front left side so pull up the top of the front
cabinet to remove it.
2. Attachment
1) Insert the claw on the front left side into the side
cabinet (left).
2) Hook the bottom part of the front right side onto the
concave section of the bottom plate. Insert the claw
of the side cabinet (right) into the square hole in the
front cabinet.
3) Return the screws that were removed above to their
original positions and attach them.
No.
Part name
Procedure
Remarks
Hock
Hock
Hock
Corner hole
Corner hole
Corner hole