Toshiba RAV-GP561ATW-E, Service Manual, Page: 110 / 131

110
(7) Compressor 1) Following to work of Detachment of (1), (2), (3), (4)
and (5).
2) Extract refrigerant gas.
3) Remove the partition plate.
(4 pcs, M4 × 8 truss screws)
4) Remove the sound insulation material.
5) Remove terminal cover of the compressor, and
disconnect lead wire of the compressor from the
terminal.
NOTE
Never reuse the compressor lead wires which you
disconnected. Use the new one. If you reuse it, it may
malfunction.
6) Remove pipe connected to the compressor with a
burner.
• Take care to keep the 4-way valve away from
naked flames. (Otherwise, it may malfunction.)
7) Remove the fixing screw of the bottom plate and
heat exchanger.
(1 pc, M4 × 8 truss screw)
8) Remove the fixing screws of the bottom plate and
valve fixing plate.
(2 pcs, M4 × 10 hexagon screws)
9) Pull upward the refrigeration cycle.
10) Remove NUT (3 pcs, H13 nuts) fixing the compres-
sor to the bottom plate.
(8) Reactor 1) Following to work of Detachment of (2) and (3).
2) Remove screws fixing the reactors.
(2 pcs, M4 × 8 truss screws)
No. Part name Procedure Remarks
Compressor Compressor Compressor
Valve
fixing
plate Valve
fixing
plate Valve
fixing
plate
Partition
plate Partition
plate Partition
plate