Toshiba RAS-M10YDCV-E, Service Manual, Page: 19 / 62

– 19 –
2 2 0 V / 2 3 0 V 2 4 0 V
2 2 0 V 2 3 0 V A B
AUTO RESTART
OFF ON TEMPORARY
COOL AUTO
VOLTAGE1
VOLTAGE2 REMOCON
AUTO RESTART
OFF ON TEMPORARY
COOL AUTO
AUTO RESTART
OFF ON TEMPORARY
COOL AUTO
OPERATION
Slide the slide switch to AUTO RESTART ON side.
MOTION
When you set to “ON” position of Auto restart, Pi Pi Pi
sound (3 times) are appear.
(During power supply to the unit)
When power supplying return, system will be restart
automatically.
OPERATION
Slide the slide switch to AUTO RESTART OFF side.
MOTION
When you set to “OFF” position of Auto restart, Pi Pi Pi
sound (3 times) are appear.
(During power supply to the unit)
When power supplying return, system will not be
restart automatically.
8-5. Auto Restart Function
This unit is equipped with an Automatic restarting function which allows the unit to restart and resume the set
operating conditions in the event of a supply power shutdown without the use of the remote controller.
The operation will resume without warning three minutes after the power is restored.
INFORMATION
The AUTO RESTART FUNCTION is not set to work on shipment from the factory, and so it is necessary to
set it to function as required.
CAUTION
When wired remote controller is connected and in case of its
batteries are exhausted or not used, the unit restart FAN ONLY
operation.
• The Auto Restart function will not accept an instruction if timer operation with the remote controller is selected.
(Please refer to the section of setting the timer operation.)
HOW TO CANCEL THE AUTO RESTART
To cancel the AUTO RESTART function, proceed as follows:
The system will now be required to manually restart with the remote controller after the main supply is returned.
HOW TO SET THE AUTO RESTART
To set the auto restart function, proceed as follows: