Toshiba RAS-4M27U2AVG-E Service Manual Download Page 29

Page: 29 / 109

43° to 45°

45° to 46°

B A

Table 3-2-6 Flare and flare nut dimensions for R22

Nominal

diameter

1/4

3/8

1/2

5/8

3/4

Outer diameter

(mm)

6.35

9.52

12.70

15.88

19.05

Thickness

(mm)

0.8

1.0

Dimension (mm)

9.0

9.2

6.5

13.0

13.5

9.7

16.2

16.0

12.9

19.7

19.0

16.0

23.3

24.0

19.2

Flare nut width

(mm)

Fig. 3-2-2 Relations between flare nut and flare seal surface

Flare Connecting Procedures and Precautions

Make sure that the flare and union portions do not have any scar or dust, etc.

Correctly align the processed flare surface with the union axis.

Tighten the flare with designated torque by means of a torque wrench. The tightening torque for R

the same as that for conventional R22. Incidentally, when the torque is weak, the gas leakage may occur.

When it is strong, the flare nut may crack and may be made non-removable. When choosing the tighten-

ing torque, comply with values designated by manufacturers. Table 3-2-7 shows reference values.

NOTE :

When applying oil to the flare surface, be sure to use oil designated by the manufacturer.

If any other oil is used, the lubricating oils may deteriorate and cause the compressor to burn out.

Table 3-2-7 Tightening torque of flare for R

(R410A)

[Reference values]

Nominal

diameter

1/4

3/8

1/2

5/8

Outer diameter

(mm)

6.35

9.52

12.70

15.88

Tightening torque

N•m (kgf•cm)

14 to 18 (140 to 180)

33 to 42 (330 to 420)

50 to 62 (500 to 620)

63 to 77 (630 to 770)

Tightening torque of torque

wrenches available on the market

N•m (kgf•cm)

16 (160), 18 (180)

42 (420)

55 (550)

65 (650)

FILE NO. SVM-18052

-1

- 29 -

Summary of Contents for RAS-4M27U2AVG-E














































































































Search results

Summary of Contents for RAS-4M27U2AVG-E

Reviews:

Related manuals for RAS-4M27U2AVG-E

Brands by name

Popular brands

Toshiba RAS-4M27U2AVG-E, Service Manual

Search results

Summary of Contents for RAS-4M27U2AVG-E

Reviews:

Related manuals for RAS-4M27U2AVG-E

Brands by name

Popular brands