9-4-3. Names and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pushing the
button.
1
Transmission mark
This transmission mark indicates when the remote
controller transmits signals to the indoor unit.
2
Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control,
: Cool,
: Dry,
: Heat)
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
7
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pushed during operation.
The
mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Push another button to turn off the mark.
8
ECO indicator
Indicates when the ECO is in activated.
Push the ECO button to start and push it again to
stop operation.
9
A, B change indicator remote controller
When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)
1
0
Comfort sleep
Indicates when comfort sleep is activaled.
Push comfort sleep button to select.
1
1
Swing
Indicates when louver is swing.
Push swing button to start the swing operation and
push it again to stop the swing operation.
4
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW
+
, MED
, MED
+
,
HIGH
and Quiet
) can be shown.
Indicates AUTO when the operating mode is either
AUTO or : Dry.
Press and hold FAN button 5s will enter Dimming Mold
5
TIMER and clock time indicator
The time setting for timer operation or the clock time
is indicated.
The current time is always indicated except during
TIMER operation.
6
Hi POWER indicator
Indicates when the Hi POWER operation starts.
Push the Hi-POWER button to start and push it
again to stop the operation.
9
1
1
0
4
6
3
8
4
5
1
1
2
7
FILE NO. SVM-17001
- 57 -