Toshiba RAS-07E2AVSG-A, Owner'S Manual

Page: 5 / 12

11
PLASMA ION
Capture ef fi ciency of fl oating impurities in the air is accelerated by plasma ion
contaminates such as bacteria, odor, smoke, dust and virus are caught and
deactivated by Plasma lon.
1. When stopping operation.
●
After stopping, automatic cleaning starts
(TIMER lamp turns on).
* When operating time is 10 minutes
or less, cleaning function does not operate.
2. When using together with the air conditioning
Air volume and direction setting of air conditioner have priority.
Operation
●
Operate Plasma lon while air conditioning.
Press the
PURE
button.
Stop
●
Stop both Plasma lon and air conditioning.
Press the button.
●
Stop only Plasma lon.
Press the
PURE
button.
Note : Plasma lon operation does not remove harmful substances from
cigarette smoke (carbon monoxide etc.). Open a window occasionally
for ventilation.
PURE
or
For comfortable sleep, automatically control air fl ow and automatically turn OFF
(Except in DRY mode).
1. Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
2. Press to cancel the comfort sleep operation.
Note : The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating
operation, the set temperature will decrease.
COMFORT SLEEP OPERATION
12
HADA CARE FLOW
Air
fl ow upward to the ceiling, provide Indirect air fl ow to body and homogenize
room temperture.
HADA CARE FLOW operation
Press For start and stop HADA CARE FLOW
Cancel
HADA CARE FLOW
HADA CARE FLOW
Note :
● During HADA CARE FLOW mode, FIX and SWING button cannot active
HADA CARE FLOW OPERATION 13
Power-Selection ( )
This function is used when the circuit breaker is shared with other electrical
appliances. It limits the maximum current and power consumption to 100%, 75%,
or 50% and can be implemented by POWER-SELECTION. The lower percentage,
the higher saving and also longer compressor lifetime.
Note :
● When the level is selected, POWER-SEL level fl ashes on remote LCD
display for 3 seconds.
In case of 75% and 50% level, number “75” or “50” also
fl ashes for 2
seconds.
● Due to the reason that POWER-SELECTION function limits the
maximum current, inadequate cooling or heating capacity may occur.
Silent Operation ( )
Keep outdoor unit operating silently to ensure either yourself or neighborhood
will have a tight sleep in nighttime. By this feature, the heating capacity will be
optimized to deliver such silent experience. The silent operation can be selected
from one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
Though operating silently, the Heating (or Cooling) capacity is still prioritized to
ensure having suf
fi cient comfort inside the room.
This setting is a perfect balance between the Heating (or Cooling) capacity and
the Sound level of outdoor unit.
Silent 2:
Compromising the Heating (or Cooling) capacity to the Sound level in any
circumstance where the outdoor unit’s sound level is highly prioritized.
This setting has a purpose to reduce the maximum sound level of outdoor unit by
4 dB(A).
Note :
● While activating of Silent operation, inadequate heating (or cooling)
capacity may occur.
Power-Selection and Silent Operation (Outdoor Unit)
POWER-SELECTION AND SILENT
OPERATION (OUTDOOR UNIT)
14
[100%] [75%] [50%]
SILENT#2 SILENT#1
TIMER OPERATION 15
Set the timer when the air conditioner is operating.
Setting the ON Timer Setting the OFF Timer
1 Press : Set the desired ON
timer.
Press : Set the desired
OFF timer.
2
Press : Set the timer. Press : Set the timer.
3
Press : Cancel the timer. Press : Cancel the timer.
Note:
● Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
● The setting will be saved for the next same operation.
PRESET OPERATION 16
Set your preferred operation for future use. The setting will be memorized by
the unit for future operation (except air
fl ow direction).
1. Select your preferred operation.
2. Press and hold for 3 seconds to memorize the setting.
The P mark displays.
3. Press : Operate the preset operation.