Toshiba Qosmio G35 User Manual Download

Page: 56 / 393

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3

Turning on the power

To turn on the computer:

Make sure any external devices (such as the AC adaptor,
if you plan to use AC power rather than battery power)
are properly connected and ready.

Check to ensure that all optical drives are empty.

Press and hold the power button in until the power button
and the on/off light on the system indicator panel glow
blue—about one second.

(Sample Illustration) Turning on the power

The preinstalled operating system will load
automatically.

When you turn on the computer for the first time, do not turn
off the power again until the operating system has loaded
completely.

Summary of Contents for Qosmio G35










































































































































































































































































































































































































Search results

Summary of Contents for Qosmio G35

Reviews:

Related manuals for Qosmio G35

Brands by name

Popular brands

Toshiba Qosmio G35, User Manual

Search results

Summary of Contents for Qosmio G35

Reviews:

Related manuals for Qosmio G35

Brands by name

Popular brands