Real Time Clock
Problem
Procedure
The BIOS setting
and system date/
time are lost.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
following steps:
1.
Turn on the computer.
2.
Press the
F2
key when the
Qosmio
logo
screen appears - the BIOS setup application
will load.
3.
Set the date in the
System Date
field.
4.
Set the time in the
System Time
field.
5.
Press
F10
- a confirmation message will be
displayed.
6.
Press the
ENTER
key - the BIOS setup
application will end and the computer will
restart.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the section
Operating Basics, for further information.
Problem
Procedure
Output to screen is
garbled
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to the HW Setup section
in Chapter 4, Utilities & Advanced Usage, for further information.
Problem
Procedure
No display
Press the
FN
+
F5
hot keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
Qosmio F750 Series
User's Manual
6-7
