manualshive.com logo in svg

Toshiba Qosmio F750 Series, User Manual, Page: 119 / 184

Share
Download
Toshiba Qosmio F750 Series User Manual Download Page 119

If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.

Accessing HW Setup

To run the HW Setup program, click 

Start -> All Programs -> TOSHIBA ->

Utilities -> HWSetup

.

HW Setup window

The HW Setup window contains a number of tabs (General, Display, CPU,
Boot Setting, Keyboard, USB, SATA, LAN and Button Setting) to allow
specific functions of the computer to be configured.
In addition there are also three buttons : OK, Cancel and Apply.

OK

Accepts your changes and closes the HW Setup
window.

Cancel

Closes the window without accepting your
changes.

Apply

Accepts all your changes without closing the HW
Setup window.

General

This window displays the BIOS/EC version and contains two buttons :

Default 

and 

About

.

Default

Return all HW Setup values to the factory
settings.

About

Display the HW Setup version.

Setup

This field displays the installed 

BIOS version

, 

date

 and 

EC version

.

Display

This tab lets you customize your computer’s display settings for either the
internal display or an external monitor.

Qosmio F750 Series

User's Manual

4-17

Summary of Contents for Qosmio F750 Series

























































































































































































Reviews:

No comments