Toshiba Qosmio F25 User Manual Download Page 107

Page: 107 / 345

107

Learning the Basics

Powering down the computer

5.375 x 8.375 ver 2.3

mode. The on/off light blinks amber to indicate the machine
is in Standby mode.

If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.

Going into Standby mode more quickly

There are three other ways to put the computer into Standby
mode:

❖

By pressing the power button

❖

By closing the display panel

❖

By pressing the hot key combination

This section describes how to set up your Standby options for
the first two methods. For information about the hotkey
combination, see

“Standby mode” on page 296

To set up your Standby options:

Click

Start

Control Panel.

The Control Panel window appears.

Click

Performance and Maintenance

Double-click the

Toshiba Power Saver

icon.

The TOSHIBA Power Saver Properties window appears.

Click to select a profile.

Click the

Setup Action

tab.

Select

Stand By

for the options you want.

❖

When I press the power button

Set this option to Stand By so that the computer will
go into Standby mode when you press the power
button.

Summary of Contents for Qosmio F25


























































































































































































































































































































































Search results

Summary of Contents for Qosmio F25

Reviews:

Brands by name

Popular brands

Toshiba Qosmio F25, User Manual

Search results

Summary of Contents for Qosmio F25

Reviews:

Brands by name

Popular brands