Toshiba Qosmio E10 Page 196 Maintenance Manual Download

Page: 196 / 373

3 Tests and Diagnostics

3.29 SETUP

4. Password

This option sets or resets the user password for power on and instant security
(

Fn+F1

Registered

The user password has been registered.

Not registered

The user password has not been registered.

For details on setting the user password, refer to the User’s Manual.

5. Boot Priority

(a) Boot Priority

Use this option to set the priority for booting of the computer and the priority
for the HDD for booting.

FDD

→

HDD

→

CD-ROM

→

LAN:

The computer looks for bootable files in

the following order: FDD, HDD, CD-
ROM (*1) and LAN

HDD

→

CD-ROM

→

LAN

→

FDD:

The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.

FDD

→

CD-ROM

→

LAN

→

HDD:

The computer looks for bootable files in

the following order: FDD, CD-ROM,
LAN and HDD.

CD-ROM

→

LAN

→

HDD

→

FDD:

The computer looks for bootable files in

the following order: CD-ROM, LAN,
HDD and FDD.

CD-ROM

→

LAN

→

FDD

→

HDD:

The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.

HDD

→

FDD

→

CD-ROM

→

LAN:

The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)

(*1) CD-ROM refers to a Optical Disk Drive.

(b) Network Boot Protocol

Use this option to set the starting method via a network.

PXE

Sets to PXE protocol. (Default)

RPL

Sets to RPL protocol.

3-84

QOSMIO E10 Maintenance Manual (960-492)

Summary of Contents for Qosmio E10






















































































































































































































































































































































































Search results

Summary of Contents for Qosmio E10

Reviews:

Related manuals for Qosmio E10

Brands by name

Popular brands

Toshiba Qosmio E10, Maintenance Manual

Search results

Summary of Contents for Qosmio E10

Reviews:

Related manuals for Qosmio E10

Brands by name

Popular brands