manualshive.com logo in svg

Toshiba Qosmio E10, Maintenance Manual, Page: 189 / 373

Share
Download
Toshiba Qosmio E10 Maintenance Manual Download Page 189

3.28  Sound Test program 

3

  Tests and Diagnostics 

QOSMIO E10 Maintenance Manual (960-492)  

3-77 

Select the track number you want to test and press 

Enter

 twice. 

The following message appears in the display and selected track is played. 

Play start CD sound ! 

Press any key <play stop> 

After pressing any key, the music stops and the display returns to the selection menu of the 
track number. 

CAUTION

:  When the CD-ROM test is executed, “ALL DEVICE” must be selected in the 

“SET-UP” of the BIOS SETUP. If the “ALL DEVICE” is not selected, music 
can not be played. 

 

3.28.4 

CD Sound (Legacy) test 

To execute the CD Sound (Legacy) test, select 

4

 and press 

Enter

.  

Caution:

 This model does not support CD Sound (Legacy) test. 

 

Summary of Contents for Qosmio E10






















































































































































































































































































































































































Reviews:

No comments